Siemens IP-Module User Manual download pdf (Page 7)

7 / 30

Siemens BACnet/IP communication with POL908.00 CB1J3962en

Building Technologies About this document 2010-03-26

1.5 Important information on safety

Use Modbus communication only for control and monitoring.

Trouble-free and safe product operation of the above products presupposes

transport, storage, mounting, installation, and commissioning as intended as well

as careful operation.

Fuses, switches, wiring and grounding must comply with local safety regulations for

electrical installations.

When wiring, strictly separate AC 230 V mains voltage from AC 24 V safety extra-

low voltage (SELV) to protect against electrical shock!

Only qualified staff trained accordingly may prepare for use, commission, and

maintain Modbus communication modules.

Maintenance of Climatix Controller and Modbus communication modules generally

only means regular cleaning. We recommend removing dust and dirt from system

components installed in the control panels during standard service.

Only authorized staff may diagnose and correct faults and recommission the plant.

This applies to working within the panel as well (e.g. testing or changing fuses).

Refer to the environmental conditions specified in the respective data sheets for

storage and transport.

If in doubt, contact your supplier.

Devices contain electrical and electronic components; do not dispose of them in

household garbage.

Observe all local and applicable laws.

Field of application

Intended use

Electrical

installation

Wiring

Commissioning and

maintenance

Maintenance

Faults

Storage and transport

Disposal

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

No comments

Siemens IP-Module User Manual Page 7