Siemens 680 Operations Instructions Page 20
- Page / 112
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Power supply
4.2 Charging the device
SIMATIC RF680M Mobile Reader
18 Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
4.2 Charging the device
Complete charging of an empty battery takes approximately 5 hours.
Starting the charging operation
The charging operation is started as soon as you insert the mobile reader into the charging
station.
WARNING
Explosion hazard when using a different charging station.
Use only the original charging station from PSION. Use of another charging station can
result in explosions and serious personal injury.
Detecting the level of charge
You can check the level of charge via the charge indicator (LED) on the reader when the
SIMATIC RF680M is placed in the charging station:
Table 4- 1 Status LED
LED color LED status Meaning
Flashing Charging in progress. Battery charge is less than 80%
Flashes slowly Charging in progress. Battery charge exceeds 80%
Rapid flashing Battery temperature is higher than 45 °C. Charging not in
progress.
Green
Permanently lit Battery is fully charged.
red Permanently lit Charging not in progress. Battery fault!
4.3 The backup battery
The backup battery in the SIMATIC RF680M is used for retaining the application data when
the main batteries are discharged. It is a rechargeable battery that is charged together with
the main battery.
Please note that a new backup battery (in the case of an empty or removed main battery)
can only retain the data in the tag for a few minutes. It cannot be replaced because it is
permanently connected to the device.
- SIMATIC Ident 1
- Table of contents 5
- Table of contents 7
- Introduction 10
- Safety Information 11
- Description 13
- Functions 14
- 3.2 Design 15
- ① under a cover 16
- 3-1 Read head with antenna 16
- Description 17
- Power supply 19
- 4.2 Charging the device 20
- 4.3 The backup battery 20
- Commissioning 21
- 5-2 ON/OFF button 22
- 5.3.3 Performing a back-up 23
- 5.4.1 Operating modes 24
- 5-3 Operating mode 24
- Commissioning 25
- Operation 27
- 6.2 The Touch display 28
- Software overview 29
- 8.1.1 Necessary components 31
- (WKHUQHW 32
- Example 1 33
- Example 2 33
- 8.1.7 Creating a back-up 34
- 8-1 List of RFID tag IDs 35
- 8-2 List of RFID tag IDs 36
- 8.3.2 The data editor 37
- ③ CRC: 2 bytes of check sums 39
- ① Kill password 40
- ② Access password 40
- 8-3 Progress display 41
- 8-4 Timeout display 41
- 8.3.2.2 Read tag 42
- Read tag data 42
- Read complete tag 42
- See also 43
- 8.3.2.3 Writing to the tag 43
- Write tag data 43
- 8.3.3 Overview of functions 44
- 8-7 The file functions 46
- 8.3.4.4 Exit 47
- 8.3.5.2 Write ID 49
- Enter ID 49
- 8-10 Lock Tag 50
- Example 51
- 8.3.5.4 Kill tag 52
- 8-11 Kill tag 53
- 8-12 The Tools functions 53
- 8-13 Password 54
- 8-14 Reader status 55
- 8-16 Settings window 56
- 8-17 Auto-Save Filename 58
- 8-18 "Help" menu 59
- "RF680M" software 61
- 9.3 The data editor 62
- 9-1 The file functions 65
- 9.4.2 Open 65
- 9.4.4 Save List As 65
- 9.4.5 Append List 66
- 9.4.6 Exit 66
- 9-2 The tag functions 66
- 9-4 Scan tag 67
- 9-5 Progress display 68
- 9-6 Timeout display 69
- 9.5.4 Read tag 69
- 9.5.5 Writing to the tag 71
- 9.5.6 Copying tag data 72
- 9.5.7 Write ID 73
- 9.5.8 Locking data areas 73
- 9-10 Lock Tag 74
- 9.5.9 Kill tag 76
- 9-11 Kill tag 76
- 9.5.10 Tag Type Selection 77
- 9-13 Enter user memory 78
- 9-15 Password 80
- Initial Q 81
- 9-17 Reader settings 82
- 9.6.5 Settings 82
- 9-18 Settings window 82
- 9-19 Auto-Save Filename 84
- 9.6.6 Setting the language 85
- 9.8 Application example 86
- 9-23 Scan tag 87
- Save tag ID list 88
- Read tag 88
- Write to the tag 88
- Copying tag data 88
- Advanced functions 89
- 10.2.1 Prerequisites 90
- Advanced functions 91
- 10-4 Flash disk folder 92
- 10.4 System reset 95
- 10.4 System reset 96
- Troubleshooting 97
- Technical data 100
- Ordering data 101
- Appendix 103
- Technical Support 104
- RFID homepage 104
- Training center 105
- A.4 Service & support 106
- Glossary 107
- RFID systems 108
- Transponder 108
- SIMATIC RF680M Mobile Reader 109
- Index 111
- Get more information 112
Related products and manuals for Power generators Siemens 680
(8 pages)© 2020, manymanuals.com. All rights reserved. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals