Siemens HiPath 4000 User Manual download pdf (Page 78)

Alphabetical Reference Description of functions

SNMP Server Address

•If an Æ SNMP server exists in the network, enter the Æ IP address of

this server here.

• Standard address Æ page 96.

Æ page 53

SNMP Trap Port

• Define the Æ Port here through which the Æ SNMP error messages

should be transmitted.

Æ page 53

SRSR Automatic Switch Back

• Activate this checkbox for executing automatical change between

standby mode (emergency mode) and home mode (standard mode) of

the communication plattform.

Æ page 57

SRSR Enabled

• Activate this checkbox if two communication plattforms are used

(Main-PBX und Standby-PBX).

• Æ Gateway Address and Æ Subscriber Number of the Standby Æ PBX

must be entered Æ page 55.

Æ page 57

SRSR Switch To Home Expiry Timeout

• Required waiting time for change from standby mode (emergency

mode) to home mode (standard mode). During this time a switch over

is not possible.

• Valid values: 1 ... 255.

•Standard valueÆ page 96.

Æ page 57

SRSR Switch To Home Retry Count

• Maximum number of negative attempts for switching over from home

mode (standard mode) to standby mode (emergency mode).

• Valid values: 1 ... 255.

•Standard valueÆ page 96.

Æ page 57

SRSR Switch To Standby Expiry Timeout

• Required waiting time for change from home mode (standard mode) to

standby mode (emergency mode). During this time a switch over is not

possible.

• Valid values: 1 ... 255.

•Standard valueÆ page 96.

Æ page 57

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 109 110

No comments

Siemens HiPath 4000 User Manual Page 78