Siemens C450 IP User Manual download pdf (Page 26)

25

Setting handset/base station

Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / settings_bs_hs_pabx.fm / 01.03.2007

Version 4, 16.09.2005

Restoring the base station to

factory settings

Resetting the base station via the

menu

Each individual setting is reset, in particu-

lar:

u VoIP settings such as VoIP provider and

account data and DTMF settings

u Settings for the local network

(page 25)

u Default connection (page 25)

u The names of the handsets

u SMS settings (e.g.SMS centres)

u PABX connection settings.

SMS lists and calls lists are deleted.

The date and time and the system PIN are

retained. The handsets are still registered.

§Menu§ ¢ Settings ¢ Base ¢ Base Reset

§OK§ Press the display key to

confirm.

Resetting the base station using a key

on the base station

As with resetting the base station via the

menu, all individual settings are reset. The

system PIN will also be reset to "0000" and

all handsets registered above and

beyond the delivery scope are deregis-

tered.

¤ Remove the cable connections from

the base station to the router and fixed

network.

¤ Remove the base station mains unit

from the socket.

¤ Press and hold the registration/paging

key (page 1).

¤ Plug the mains unit back into the power

socket.

¤ Keep holding the registration/paging

key (at least 10 sec.).

¤ Release the registration/paging key.

The base station has now been reset.

Setting the default connection

You can make settings according to

whether you want to make calls via VoIP or

fixed network by default.

§Menu§ ¢ Settings ¢ Base ¢ Telephony

¢ Default Line Type

IP / fixed line

Select and press

§OK§ (‰ =on).

For additional information on the phone

and VoIP settings, please see the full user

guide for your Gigaset C450 IP on the

Internet at www.siemens.com/gigaset.

Assigning the phone

a fixed IP address

If DHCP is disabled on the router, you must

assign the phone a fixed IP address and

generally enter the router as the gateway

to the Internet and DNS server.

§Menu§ ¢ Settings ¢ Base ¢ Local Network

~ Enter the system PIN and press

§OK§.

dynamic IP address (‰ =on)

Select and press

§OK§.

IP Address Select and press §OK§.

~ Enter the IP address and press

§OK§. 192.168.2.2 has been

preset by default.

Subnet Mask

Select and press

§OK§.

~ If necessary, enter the subnet

mask and press

§OK§.

The default setting is:

255.255.255.000.

Please note:

For information on how to reregister the hand-

set after resetting it, where applicable, please

see the full user guide for your Gigaset C450 IP

on the Internet.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

Comments to this Manuals

No comments