Siemens ESM Operations Instructions

Building Technologies SINAMICS G120P VSD Getting Started Guide For the HVAC Industry Basic Operator Panel Edition 11/2011

Building Technologies Page 10 of 50 Last Revised: 4/11/2011 4 Installation 4.1 Dimensions G120P Dimensions (mm) Clearance Distance

Building Technologies Page 11 of 50 Last Revised: 4/11/2011 4.3 EMC Compliant Install for IP55 Units 5 Assembly - Notes Make sur

Building Technologies Page 12 of 50 Last Revised: 4/11/2011 5.1 Fitting the D-type adapter retaining bracket A special bracket has be

Building Technologies Page 13 of 50 Last Revised: 4/11/2011 The correct fitting of the ferrite rings is shown in the figure below. As p

Building Technologies Page 14 of 50 Last Revised: 4/11/2011 5.3 Control Unit Connections Note that the ratings for the digital outputs

Building Technologies Page 15 of 50 Last Revised: 4/11/2011 6 Commissioning 6.1 Using the Basic Operator Panel 6.1.1 Layout and functi

Building Technologies Page 16 of 50 Last Revised: 4/11/2011 Key Function The OK key has the following functions:  When navigating t

Building Technologies Page 17 of 50 Last Revised: 4/11/2011 Locking and unlocking the keypad To lock the BOP-2 keypad press and simul

Building Technologies Page 18 of 50 Last Revised: 4/11/2011 6.1.3 Freely selecting and changing parameters Use BOP-2 to change your in

Building Technologies Page 19 of 50 Last Revised: 4/11/2011 6.2 Commissioning the Drive 6.2.1 Commissioning Steps Here is a suggested

Building Technologies Table of Contents 1 SAFETY...

Building Technologies Page 20 of 50 Last Revised: 4/11/2011 6.2.2 Additional & Optional Steps 1. If you want Start on the fly featu

Building Technologies Page 21 of 50 Last Revised: 4/11/2011 6.2.3 Motor Nameplate Data Setup menu The setup menu is a fixed sequence

Building Technologies Page 22 of 50 Last Revised: 4/11/2011 6.2.4 Setup Menu The basic commissioning procedure is shown below. Setup M

Building Technologies Page 23 of 50 Last Revised: 4/11/2011 Motor data Sets the regional settings for the motor, for example kW and Hz.

Building Technologies Page 24 of 50 Last Revised: 4/11/2011 Motor speed Sets the value of the motor speed in RPM taken from the motor r

Building Technologies Page 25 of 50 Last Revised: 4/11/2011 Ramp up time Set the time, in seconds, in which the motor should accelerate f

Building Technologies Page 26 of 50 Last Revised: 4/11/2011 6.2.5 Monitoring Screen The details of the information displayed by the var

Building Technologies Page 27 of 50 Last Revised: 4/11/2011 6.3 Typical HVAC Applications The following list is comprised of common HVA

Building Technologies Page 28 of 50 Last Revised: 4/11/2011 6.3.1 Application #0 - Default 0-10V Speed Set-point Low Level Control

Building Technologies Page 29 of 50 Last Revised: 4/11/2011 Parameter Parameter text Parameter Value Unit Note: This parameter selects

Building Technologies Page 3 of 50 Last Revised: 4/11/2011 1 Safety Before installing and putting the equipment into operation, read th

Building Technologies Page 30 of 50

Building Technologies Page 31 of 50

Building Technologies Page 32 of 50

Building Technologies Page 33 of 50

Building Technologies Page 34 of 50

Building Technologies Page 35 of 50

Building Technologies Page 36 of 50

Building Technologies Page 37 of 50

Building Technologies Page 38 of 50

Building Technologies Page 39 of 50

Building Technologies Page 4 of 50 Last Revised: 4/11/2011 2 Introduction The G120P variable speed drive is aimed at providing a versatil

Building Technologies Page 40 of 50

Building Technologies Page 41 of 50

Building Technologies Page 42 of 50

Building Technologies Page 43 of 50

Building Technologies Page 44 of 50

Building Technologies Page 45 of 50

Building Technologies Page 46 of 50

Building Technologies Page 47 of 50

Building Technologies Page 48 of 50

Building Technologies Page 49 of 50

Building Technologies Page 5 of 50 Last Revised: 4/11/2011 2.1.3 Power Modules – PM230 IP55 2.2 Rating label information Every Power

Building Technologies Page 50 of 50

Building Technologies Page 6 of 50 Last Revised: 4/11/2011  Temperature range Is the operating temperature range of the product.  Th

Building Technologies Page 7 of 50 Last Revised: 4/11/2011 Point 1 – VSD Output Characteristic The load characteristic parameter is foun

Building Technologies Page 8 of 50 Last Revised:

Building Technologies Page 9 of 50 Last Revised: 4/11/2011 3.2 EMC Considerations In 2005 the standards governing the level of acceptab