Siemens TC63 User Manual

TDC Development Support Board for Siemens Wireless Modules Introduction The TDC Development Support Board (DSB) is intended to assist engineers and de

TDC Development Support Board for Siemens Wireless Modules Links LK1 - Disconnect power to the module When fitted, this link connects the power supply

LK8 - ONLINEn When fitted, the output of Serial Port 0 is switched off after 100µS of inactivity, therefore saving power. When not fitted, the serial

When using the MC55i to make audio calls LK16 must be fitted such that it connects pins 2 & 3 together. For all other modules fit the link so that

TDC Development Support Board for Siemens Wireless Modules Indicators Last update - 5th February 2007 I2C / SPI Port Serial Port 0 Serial Port 1 LED

TDC Development Support Board for Siemens Wireless Modules Quickstart Not much to say here, apart from checking that the jumpers are fitted in accorda

TDC Development Support Board for Siemens Wireless Modules Overview This board is a platform for engineers to develop GSM/GPRS, EDGE, 3G, or combined

All of the connectors, switches and links are described in detail elsewhere via the hyperlinks. Board dimensions : 135mm x 178mm x 30mm. Current cons

Please note that this photograph is an early version, and slightly different to the shipped version.

TDC Development Support Board for Siemens Wireless Modules Connectors J1 - 4mm Main power J2 - 4mm banana plug main power J3 - 4mm banana plug main po

J6 - Serial port 1 / ASC1 J7 - USB B Jack J8 - SIM Card Holder Pin Description1 DCD - Data Carrier Detect 2RXD - Received Data 3TXD - Transmit Data

Last update - 17th April 2008J9 - SIM Card Breakout 3CLOCK4GND5VPP6DATAPin Description1 CCVCC2 CCRST3 CCCLK4 CCGND5 CCGND6 CCIO7 CCGND8 CCINJ15 - 5

TDC Development Support Board for Siemens Wireless Modules Switches SW1 - 3V3_4V5 / VBATT When in the 3V3_4V5 position the module will be powered by