Siemens C10 User's Guide Page 27
- Page / 250
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
HWC_Startup.fm
A31003-W1010-A100-1-7619, July 2005
HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide
25
HiPath Wireless Controller: Startup
First-time setup of HiPath Wireless Controller
4. Perform initial setup of the HiPath Wireless Controller to change its factory default IP
address.
5. After that, connect the HiPath Wireless Controller to the enterprise LAN.
3.2 First-time setup of HiPath Wireless Controller
3.2.1 Management port first-time setup
Before you can connect the HiPath Wireless Controller to the enterprise network, you must
change the IP address of the HiPath Wireless Controller management port from its factory
default to the IP address suitable for your enterprise network.
Access the HiPath Wireless Controller for initial setup by one of two methods:
● a device supporting VT100 emulation such as a PC running HyperTerm, attached to the
HiPath Wireless Controller’s DB9 serial port (COM1 port) via a cross-over (null modem)
cable. The Command Line Interface (CLI) commands for the initial setup are described in
an attached appendix.
● a laptop computer, running a web browser such as Internet Explorer 6.0 (or higher),
attached to the HiPath Wireless Controller’s ethernet Management Port (RJ45 port) via an
ethernet cross-over cable (cable provided with the HiPath Wireless Controller). The steps
for initial setup in the Graphical User Interface are described below.
The factory default management port setup of the HiPath Wireless Controller is:
3.2.1.1 Changing the Management Port IP address: web browser method
1. Connect a cross-over ethernet cable between the ethernet port of the laptop and ethernet
Management Port of the HiPath Wireless Controller.
2. Statically assign an unused IP address in the 192.168.10.0/24 subnet for the ethernet port
of the PC (for example, 192.168.10.205).
3. Run Internet Explorer (version 6.0 or above) or other web browser on the laptop.
Hostname: HWC
Management Port IP address: 192.168.10.1:5825
Management Network Mask: 255.255.255.0
- HiPath Wireless 1
- Convergence Software, V3.0 1
- *1PA31003-W1010-A100-1-7619* 2
- Content 0 3
- HWC_User_GuideTOC.fm 4
- 1 About this Guide 7
- 1.3 Formatting conventions 8
- 1.4 Documentation feedback 9
- 1.5 Protocols and standards 9
- 1.6 Regulatory information 9
- 1.6.1 Safety 9
- 1.6.2 Emissions 10
- 1.6.3 Radio 10
- 1.6.4 Other Approvals 11
- About this Guide 12
- Regulatory information 12
- Software solution 13
- HWC_Intro.fm 14
- 2.2.2 Network traffic flow 20
- 2.2.3 Network security 21
- 2.2.7 Mobility and roaming 23
- 2.2.8 Availability 24
- HWC_Startup.fm 26
- Software configuration 33
- 4.2 Enabling the product key 34
- 4.3 Setting up the data ports 35
- HWC_SoftwareConfig.fm 36
- 4.4 Setting up static routes 37
- 4.5 Setting up OSPF Routing 39
- 5 Wireless AP: startup 45
- HWC_APStartup.fm 46
- 5.5.1 Discovery steps 50
- Wireless AP: startup 64
- 6.1 Overview 65
- 6.2 What is a VNS? 66
- 6.3 Topology of a VNS 67
- HWC_VNSIntro.fm 68
- 6.5 Filtering for a VNS 69
- 6.7 Setting up a new VNS 71
- 6.8 Global Settings for a VNS 73
- 7.1 Topology for a VNS 75
- 7.2 Authentication for a VNS 80
- 7.3 Accounting for a VNS 89
- 7.4 RADIUS Policy for a VNS 90
- 7.5 Filtering rules for a VNS 92
- HWC_VNSConfiguration.fm 100
- 7.6 Multicast for a VNS 101
- 7.7 Privacy for a VNS 102
- 7.9 A VNS for voice traffic 107
- Virtual Network configuration 110
- A VNS for voice traffic 110
- Availability and Mobility 111
- 9.1 Management users 119
- 9.2 Network time 120
- 9.3 Check Point event logging 121
- HWC_ControllerConfig.fm 122
- 9.4 Setting up SNMP 123
- 9.4.1 MIB support 123
- Setting up SNMP 126
- HWC_3rdPartyAPs.fm 128
- 11.1 Overview 131
- HWC_Mitigator.fm 132
- 11.3 Mitigator: running scans 133
- 11.4 The Analysis Engine 135
- 12 Ongoing operation 141
- HWC_Ongoing.fm 142
- 12.2.1 Client disassociate 144
- 12.2.2 Client blacklist 145
- 12.5 Reports and displays 154
- 12.5.1 View displays 154
- 12.5.2 View reports 156
- 13 Glossary 157
- HWC_Glossary.fm 158
- A.2 Wireless AP system states 180
- HWC_AppendixA.fm 181
- Wireless AP system states 182
- B CLI command reference 183
- HWC_AppendixB.fm 184
- CLI command reference 188
- HWC_AppendixC.fm 190
- D.1 RFC list 193
- HWC_AppendixD.fm 194
- D.2 802.11 standards list 195
- Reference lists of standards 196
- 802.11 standards list 196
- E Support for Wireless AP 197
- HWC_AppendixE.fm 198
- F RADIUS Attributes 199
- F.2 RADIUS Accounting 200
- F.2.1 Account-Start Packet 200
- HWC_AppendixF.fm 201
- F.2.3 Termination Codes 202
- G Logs and Events 203
- G.2 Critical 204
- G.2.1 ACCESSPOINT 204
- HWC_AppendixG.fm 205
- G.2.2 CDR_COLLECTOR 209
- G.2.3 CONFIG_MANAGER 211
- G.2.4 EVENT_SERVER 212
- G.2.5 LANGLEY 214
- G.2.6 RADIUS_ACCOUNTING 214
- G.2.7 RADIUS_CLIENT 215
- G.2.8 RF_DATA_COLLECTOR 216
- G.2.9 RU_MANAGER 217
- G.2.10 SECURITY_MANAGER 218
- G.2.11 STARTUP_MANAGER 219
- G.2.12 STATS_SERVER 221
- G.2.13 VNMGR 222
- G.3 Major 225
- G.3.1 ACCESSPOINT 225
- G.3.2 CDR_COLLECTOR 226
- G.3.3 CLI 228
- G.3.4 CONFIG_MANAGER 229
- G.3.5 CPDP_AGENT_ID 230
- G.3.6 EVENT_SERVER 230
- G.3.7 LANGLEY 232
- G.3.8 NSM_SERVER 233
- G.3.9 OSPF_SERVER 234
- G.3.10 PORT_INFO_J_MANAGER 234
- G.3.11 RADIUS_ACCOUNTING 234
- G.3.12 RADIUS_CLIENT 235
- G.3.13 REDIR_ID 235
- G.3.14 RF_DATA_COLLECTOR 236
- G.3.15 RU_MANAGER 236
- G.3.16 SECURITY_MANAGER 237
- G.3.17 VNMGR 239
- Logs and Events 242
- HWC_User_GuideIX.fm 243
- Nur für den internen Gebrauch 244
- Printed in Germany 250
Related products and manuals for Mobile phones Siemens C10
Mobile phones Siemens A75 User Manual
(17 pages)
(17 pages)
Mobile phones Siemens CV65 User's Guide
(73 pages)
(73 pages)
Mobile phones Siemens SP65 User's Guide
(145 pages)
(145 pages)
Mobile phones Siemens Gigaset SL1 User Manual
(112 pages)
(112 pages)
Mobile phones Siemens 4000i Service Manual
(240 pages)
(240 pages)
Mobile phones Siemens C70 User's Guide
(76 pages)
(76 pages)
Mobile phones Siemens C55 User's Guide
(137 pages)
(137 pages)
Mobile phones Siemens C11 User Manual
(14 pages)
(14 pages)
Mobile phones Siemens 1168 User's Guide
(79 pages)
(79 pages)
Mobile phones Siemens MC60 User's Guide
(118 pages)
(118 pages)
Mobile phones Siemens Hicom 118 Service Manual
(334 pages)
(334 pages)
Mobile phones Siemens CF75 User Manual
(76 pages)
(76 pages)
Mobile phones Siemens Gigaset S56 User Manual
(202 pages)
(202 pages)
Mobile phones Siemens M30 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals