Siemens INFINITI Pro User Manual download pdf (Page 12)

Safety note for instruments with audio input

The audio input can only be connected to power supplied

devices if they fulfil at least the safety provisions of

IEC 65 / DIN VDE 0860.

Your hearing instrument has an audio input. This enables

accessories to be connected. In this way you can understand

better in certain hearing situations.

The contacts for the audio input are located under the type

plate. Before using the audio input for the first time the

covering type plate must be exchanged against the supplied

type plate providing openings for the audio contacts. Your

hearing instrument specialist will do this for you. The coloured

type plates can be used to identify your left (blue) and right

(red) hearing instrument.

Your hearing instrument recognizes immediately when an

audio shoe is fitted and diverts then automatically to pro-

gram ”4”. You can notice this by the four beep tones

Fitting the audio shoe to the hearing instrument

Hook the audio shoe in from the front and press it to the

rear into the detent on the inner curve of the instrument.

Audio input program

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

No comments

Siemens INFINITI Pro User Manual Page 12