Siemens GS36NBI30 User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 94
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
en
26
Controls
Fig. 2
Switching the
appliance on
Fig. 2
Switch on the appliance with the On/Off
button 1/7.
A warning signal sounds.
The temperature display 1 flashes
and the alarm display 4 is lit.
Press the “alarm” button 4. The warning
signal switches off and the temperature
display 1 stops flashing.
When the freezer compartment has
reached its set temperature, the alarm
display 4 goes out.
Operating tips
After the appliance has been switched
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
Thesides ofthehousing are
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
1 Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
2 “Super” button (freezer
compartment)
Switches super freezing
on and off.
3 Button “lock” function
If this function is switched on, no
settings are possible via
the controls.
4 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
5 Temperature selection buttons
freezer compartment
These buttons set
the temperature in the freezer
compartment.
6 Energy saving mode display
It is lit when the appliance is not
in use.
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 93 94

Comments to this Manuals

No comments