Siemens simatic PCIL43 Service Manual download pdf (Page 15)

Application Planning

3.3 Ambient and environmental conditions

SIMATIC Rack PC IL 43

Getting Started, Edition 09/2005, A5E00432882-01

3-3

3.3 Ambient and environmental conditions

When you plan your project, you should make allowances for:

• Note the climatic and mechanical environmental conditions specified in the technical data

in your operating manual.

• Avoid extreme ambient conditions as much as possible. Protect your PC from dust,

moisture, and heat.

• The device has been designed for usage in a normal industrial environment according to

IEC 60721-3-3 (pollutant class 3C2 for chemical influence, 3S2 for sand and dust.)

SIMATIC Rack PCs may not be used in severe operating environments, for example

locations with acidic vapors or gasses, without additional protective measures (such as

the provision of clean air.)

• Keep the PC out of direct sunlight.

• Mount the PC as safely as possible to prevent danger (for example, of falling over).

• The device satisfies protection class IP 30 on the front panel.

• The clearance in the area of the ventilation slots must be at least 50 mm, so that the PC

is sufficiently ventilated.

• Do not cover the vent slots of the device.

• The device enclosure satisfies fire protection requirements to EN 60950. It may therefore

be installed without additional fire-proofing measures.

Warning

If these conditions are not upheld while mounting the system, the approvals according to

UL 60950, EN 60950 are forfeited and there is a danger of overheating and personal

injury.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Siemens simatic PCIL43 Service Manual Page 15