Siemens SPCK623 User Manual download pdf (Page 16)

 Technical data

Controller and PSU

SPC6330.310-L1

Intrusion CP, G3

SPCP332.300/333.300

Smart PSU

with I/O-Expander

SPCP432.300/433.300

Smart PSU with

2-Door Expander

Number of on-board zones 8, freely programmable

8, freely

programmable

4, for door control

EOL resistor Dual 4K7 (default), other resistor combinations configurable

Dual 4K7 (default), other resistor combinations

configurable

Max. number of hardwired zones 512

Max. number of wireless zones

120

Number of on-board open coll.

2, for internal / external bell (max. 400 mA each)

3, freely programmable

(max. 400 mA each, supplied via auxiliary output)

2, freely

programmable

2, for door control

Number of on-board relays 1, for strobe (single-pole changeover, 30 V / max. 1 A)

(single-pole changeover, 30 V DC / max. 1 A)

Max. number of outputs 512

Programmable areas 60

Max. number of user codes 512

Intrusion Event Logs 10’000 log events shared across all areas

Access Event Logs 10’000 log events

Field bus

X-BUS on RS-485 (307 kb/s) X-BUS on RS-485 (307 kb/s)

Number of field devices

128 (32 Keypads, 32 Door-expanders,

64 Input/Output expanders)

Tamper contact

On-board front cabinet spring tamper

+ 2 auxiliary tamper inputs (back tamper with SPCY130 option)

Front cabinet spring tamper /

back tamper (SPCP333/433)

2 X-BUS (2 spurs or 1 loop)

2 RS232 (RJ45 ports, for X-10 or external communication)

1 USB (PC for browser programming / terminal program)

1 Fast Programmer

Interfaces

1 Ethernet (RJ45)

2 card readers,

Wiegand 26 bits

(standard),

Clock&Data and

Wiegand 36 bit

(proprietary)

Power supply Type A (per EN50131-1), Integrated on controller PCB Type A (per EN50131-1)

Input voltage 230 V AC, +10 to -15 %, 50 Hz at transformer 230 V AC, +10 to -15 %, 50 Hz at transformer

Operating current Controller only max. 200 mA

Max. 95 mA

(all relays activated)

Quiescent current Controller only max. 170 mA Min. 77 mA

Auxiliary power (nominal)

Max. 750 mA

(subject to size of battery fitted & Security Grade required)

Max. 2 x 750 mA (subject to size of battery fitted

& Security Grade required)

Output voltage

11-14 V DC in normal conditions

(mains powered and fully charged battery)

11-14 V DC in normal conditions

(mains powered and fully charged battery)

Battery capacity (Recommended

YUASA battery, not included)

Max. 17 Ah / 12 V

Max. 7 Ah / 12 V (SPCP332/432)

Max. 17 Ah / 12 V (SPCP333/433)

Hinged metal enclosure

Small metal enclosure (SPCP332/432)

Hinged metal enclosure (SPCP333/433)

Housing

1.4 mm mild steel 1.4 mm mild steel

Dimensions (W x H x D in mm) 326 x 415 x 114

264 x 357 x 81 (SPCP332/432)

326 x 415 x 114 (SPCP333/433)

Weight 7.30 kg

5.20 kg (SPCP332/432)

7.40 kg (SPCP333/433)

Colour RAL 9003 (signal white) RAL 9003 (signal white)

Operating temperature -10 to +50 °C -10 to +50 °C

Relative humidity Max. 90 % (non-condensing) Max. 90 % (non-condensing)

Standards

Certified according to

EN50131-1:2006 (Grade 3, Class II Indoor General),

TS50131-3:2003, EN50131-6:2008

A wireless zone takes away a wired zone / optional RF receivers required.

More I/O expanders can be addressed instead of a keypad or door expander, but number of programmable inputs / outputs cannot exceed specified system limits.

Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829.

When the secondary device is powering the auxiliary output, voltages as low 9.5 V can be seen on this output before the system shuts down to deep discharge protection.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Siemens SPCK623 User Manual Page 16

Comments to this Manuals

Related products and manuals for Numeric keypads Siemens SPCK623