Siemens SpeedStream 5450 User's Guide download pdf (Page 4)

4

5

Step 2

>

Ethernet Installation

Connect the SpeedStream

®

Device

1. Connect the straight-

through Ethernet cable

(RJ-45) to the Ethernet

port on the SpeedStream

®

device (yellow port).

2. Connect the other end

of the straight-through

Ethernet cable (RJ-45)

to the Ethernet port

on your computer.

3. Plug the DSL cable (RJ-11)

into the DSL port on the

SpeedStream

®

device

(gray port).

4. Plug the other end of

the DSL cable (RJ-11)

into the phone jack.

5. Plug the power adapter

into the power outlet

and SpeedStream

®

device

(black port).

6. Ensure the SpeedStream

®

device is powered on (power

switch located on right side

of back panel).

Install Ethernet Adapter

You will need to install an Ethernet

adapter if your computer does not

already have one installed. Refer to

your Ethernet adapter manufacturer’s

documentation for complete

installation instructions.

Internet connection

Ethernet connection

to computer RJ-45

Straight-through

Ethernet cable

Optional:

use crossover

(Xover) cable when

connecting to a hub

or switch without an

“uplink” port

Power supply

Hub

RJ-11 DSL cable

1

2

3

4

6

5

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments