Siemens miniTek User Manual download pdf (Page 2)

Charging the transmitter

You will need to charge the transmitter before first use.

Connect the transmitter with the power plug to a power supply. While charging

the LED shines red.

Note: Charging time is about 5 hours depending on the status of the

rechargeable battery.

Turning the transmitter on/off

Use the on/off switch on the transmitter to turn the transmitter on. The LED

flashes blue while searching for a connection to the miniTek, then the LED shines

blue.

Note: to turn the transmitter off, use the on/off switch. Turn the transmitter off

when it is not in use.

Changing the sound level on the transmitter

Press the sound level button on the transmitter to change the volume of the

audio signal. The LED flashes blue. The number of times the LED flashes (up to 5),

indicates the volume level.

Using the transmitter

Press the on/off button on the miniTek for about 3 seconds to turn miniTek on.

Turn the transmitter on with the on/off switch.

Use one of the supplied cables to connect the transmitter to the TV or stereo.

Connect the transmitter with the power plug to a power supply or charge the

rechargeable battery regularly.

Press the Audio source button on miniTek to change to the audio program.

The Audio source button on the miniTek flashes while searching for a connection

to the transmitter and shines constantly after it is established. The LED on the

transmitter confirms that the Bluetooth audio link is established.

Start the audio transmission on your TV or stereo. You can now hear the sound

from your TV or stereo through your hearing instruments.

Note: You can use a second transmitter, which is available as an accessory. This

way the first transmitter can always remain connected to your preferred device

while the second transmitter is connected with another device (e.g. a second TV

in your bedroom).

Note: This document is to be used as a guide only for the miniTek, outlining the basic layout and functionality of the

device. In order to view a detailed and conclusive list of operating procedures and warnings relating to the device, please

refer to the official user guide.

1 2 3 4

No comments

Siemens miniTek User Manual Page 2