Siemens SITRANS P User Manual download pdf (Page 11)

UMSITRPDS3-1 Contents

November 2010

Support section of this manual or to the local Siemens sales office. The contents of this manual shall not

become part of or modify any prior or existing agreement, commitment or relationship.

Warranty

The SITRANS P DSIII transmitter warranty is based on actual operating hours, as shown in the Operating

Hours Register. The transmitter is warranted for 60 months of operation in two successive steps:

1. A 36-month 100% warranty from date of initial operation.

2. A 24-month pro-rated warranty which decreases linearly from 100% at 36 months to 0% at 60 months

of powered operation.

If Siemens cannot determine transmitter operating hours, the warranty shall commence on the date of

shipment from Siemens. All other provisions of the Siemens standard warranty remain as stated in the

sales contract.

Should the transmitter require repair during the pro-rated warranty period, the charge will be pro-rated

based on prevailing repair rates for parts and labor.

Qualified Persons

The described equipment should be installed, configured, operated, and serviced only by qualified

persons thoroughly familiar with this manual. A copy of this manual accompanies the equipment. The

current version of the manual, in Portable Document Format (PDF), can be downloaded from the Siemens

Internet site; see the Customer/Product Support section of this manual for the address.

For the purpose of this manual and product labels, a qualified person is one who is familiar with the

installation, assembly, commissioning, and operation of the product, and who has the appropriate

qualifications for their activities such as:

• Training, instruction, or authorization to operate and maintain devices/systems according to the safety

standards for electrical circuits, high pressures, and corrosive, as well as, critical media.

• For devices with explosion protection: training, instruction or authorization to work on electrical

circuits for systems that could cause explosions.

• Training or instruction according to the safety standards in the care and use of suitable safety

equipment.

General Warnings and Cautions

WARNING

An explosion-proof device may be opened only after power is removed from the device.

An intrinsically safe device loses its license as soon as it is operated in a circuit that does not meet the

requirements of the examination certificate valid in your country.

The device may be operated with high pressure and corrosive media. Therefore, serious injury and/or

considerable material damage cannot be ruled out in the event of handling of the device.

The perfect and safe operation of the equipment is conditional upon proper transport, proper storage,

installation and assembly, as well as, on careful operation and commissioning.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 221 222

No comments

Siemens SITRANS P User Manual Page 11