Siemens EH975SZ17E Instruction Manual download pdf (Page 10)

Childproof lock

The hob can be protected against being accidentally turned on,

to ensure that children do not switch on the hotplates.

Activating and deactivating the childproof

lock.

The range must be turned off.

To activate: press and hold the

# symbol for approx. 4

seconds. The

@ symbol lights up for 10 seconds. The range

is locked.

To deactivate: press and hold the

# symbol for approx. 4

seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically activates

when a hob is switched off.

Activating and deactivating

All of the relevant information on the automatic childproof lock

connection can be found in the Basic settings chapter.

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Use limitations

This function may be used for all hotplates, provided that the

other hotplate in the same group is not turned on. (See figure)

Otherwise, the display for the selected hotplate will flash

› and

Š; then it will automatically set the power level Š.

In Group 2, the Powerboost function may be activated at the

same time for all hotplates. (see diagram)

Note: The Powerboost function can be activated in the flexible

zone when used as a single hotplate. In this case, place the

pan in the centre as shown in the Flexible zone section.

To activate

1.Select the power level Š.

2.Press the programming panel located above the @› symbol.

The function has been activated.

To turn off

Press the programming panel located above the @› symbol.

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turning off a hotplate automatically

The zone turns off automatically once the selected time has

elapsed.

Program the cooking time.

The hob must be switched on:

1.Select the desired power level.

2.Press the 0 symbol for the desired hotplate. The hotplate

display shows

‹‹ and the x indicator comes on.

3.Within the next 10 seconds, select the desired cooking time

in the programming zone. The possible default setting is,

from left to right: 1, 2, 3, etc., up to 10 minutes.

The cooking time will be displayed for 10 seconds and will then

begin to count down.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.















*URXS

*URXS

*URXS

 

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Siemens EH975SZ17E Instruction Manual Page 10

Comments to this Manuals

Related products and manuals for Hobs Siemens EH975SZ17E