Siemens MC35 User Manual download pdf (Page 189)

AT Command Set

MC35_ATC_01_V04.00 Page 189 of 238 02.04.2002

8.13 AT^SLCK Facility lock

Test command

AT^SLCK=?

Response

^SLCK: (list of supported <fac>s) OK

Parameter

See write command

Write command

AT^SLCK=

[,<passwd>

[,<class>]]

Response

This command is used to lock, unlock or interrogate a ME or a network facility

<fac>.

The command can be aborted while network facilities are being set or interro-

gated.

If <mode><>2 and command is successful

If <mode>=2 and command successful

^SLCK: <status>[,<class1>[<CR><LF>

^SLCK: <status>, class2....]] OK

If error is related to ME functionality:

+CME ERROR: <err>

Parameter

<fac> Phone security locks set by user / provider

“PS” Phone locked to SIM card (phone code). ME requests password

when other than current SIM card inserted; ME may remember

certain number of previously used cards thus not requiring pass-

word when they are inserted.

“SC” SIM (lock SIM cards). SIM requests password upon ME power-up

and when this lock command issued.

“FD” SIM fixed dialling memory: If the mobile is locked to FD, only the

numbers stored to the FD memory can be dialled (up to 7 num-

bers). If PIN2 authentication has not been performed during the cur-

rent session, PIN2 is required as <passwd>.

"CS" Keypad lock (not supported since keypad cannot be connected)

Supplementary Service: Call barring

“AO” BAOC (Bar All Outgoing Calls)

“OI” BOIC (Bar Outgoing International Calls)

“OX” BOIC-exHC (Bar Outgoing International Calls except to Home

Country)

“AI” BAIC (Bar All Incoming Calls)

“IR” BIC-Roam (Bar Incoming Calls when Roaming outside the home

country)

“AB” All Barring services (applicable only for <mode>=0)

“AG” All outGoing barring services (applicable only for <mode>=0)

“AC” All inComing barring services (applicable only for <mode>=0)

Factory set facility locks:

“PF” lock Phone to the very First SIM card

“PN” Network Personalisation

“PU” Network subset Personalisation

“PP” Service Provider Personalisation

“PC” Corporate Personalisation

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 237 238

Comments to this Manuals

No comments

Siemens MC35 User Manual Page 189

Comments to this Manuals

Related products and manuals for Cellular network devices Siemens MC35